Driver Seat Occupant Classification Sensor E

Where it lives

For B00B4, the description names the sensor as the part involved.

Check these first

• A failed driver seat occupant classification sensor E
• An open or short in the sensor E circuit
• Corrosion at the driver seat sensor E connector
• A sensor E that reads out of range
• A restraint control module fault on the sensor E input

What to do next

1. Check the driver seat occupant classification sensor E connector
2. Test the sensor E circuit for an open or a short
3. Inspect the sensor E mount in the seat cushion
4. Measure the sensor E weight signal with a scan tool
5. Replace the driver seat sensor E only if the circuit tests good
6. Clear the code and retest

Look up another code