Camera Washer Actuator H

Where it lives

For B0111, start at the actuator the description names.

Check these first

• A failed camera washer actuator H
• An open or short in the actuator H wiring
• A poor electrical connection at the actuator H connector
• A body control module that does not drive actuator H

What to do next

1. Command actuator H with a scan tool
2. Inspect the actuator H connector and wiring
3. Test the actuator H circuit for open and short faults
4. Swap actuator H with a known good unit
5. Replace actuator H if it stays off command
6. Clear the code and retest

Look up another code