OBD Cylinder 7 Injection Timing Performance - Over Advanced
What it means
P01D8 stands for Cylinder 7 Injection Timing Performance - Over Advanced. P01D8 is a P code, so the fault sits in the engine, transmission and emissions systems. For P01D8, the second digit places it in fuel and air metering. For P01D8, work through the cause list below, cheapest checks first.
What to check first
For P01D8, clear the code, drive a short distance and read it again, since a code that comes back is still there and one that does not was history.
Check these first
- P01D8: Faulty or contaminated sensor in the fuel/air metering circuit
- P01D8: Damaged or shorted wiring or connector for the affected circuit
- P01D8: Vacuum leak or intake system restriction
- P01D8: Failing fuel pump, injector, or fuel pressure regulator
What to do next
P01D8 is a fault in the fuel and air metering system. The steps below are general, so what actually failed on your vehicle may not be what P01D8 names.
- P01D8: Read freeze frame data and related codes with an OBD-II scanner
- P01D8: Inspect the affected sensor wiring and connector for damage
- P01D8: Compare live sensor readings (fuel trim, airflow, temperatures) to manufacturer specs
- P01D8: Smoke test the intake system if lean or vacuum conditions are suspected
- P01D8: Replace the failed component after confirming it with live data
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.