OBD
P01EE
Engine Coolant Heater B Control Circuit High
What it means
P01EE stands for Engine Coolant Heater B Control Circuit High. P01EE is a P code, so the fault sits in the engine, transmission and emissions systems. For P01EE, the second digit places it in fuel and air metering. For P01EE, work through the cause list below, cheapest checks first.
What to check first
For P01EE, pull the connector and inspect the terminals for spread, corrosion or backed-out pins before testing anything else.
Check these first
- P01EE: Faulty or contaminated sensor in the fuel/air metering circuit
- P01EE: Damaged or shorted wiring or connector for the affected circuit
- P01EE: Vacuum leak or intake system restriction
- P01EE: Failing fuel pump, injector, or fuel pressure regulator
What to do next
P01EE is a fault in the fuel and air metering system. The steps below are general, so what actually failed on your vehicle may not be what P01EE names.
- P01EE: Read freeze frame data and related codes with an OBD-II scanner
- P01EE: Inspect the affected sensor wiring and connector for damage
- P01EE: Compare live sensor readings (fuel trim, airflow, temperatures) to manufacturer specs
- P01EE: Smoke test the intake system if lean or vacuum conditions are suspected
- P01EE: Replace the failed component after confirming it with live data
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.