Cylinder 5 Pressure Sensor Circuit

Where it lives

For P03BD, the sensor sits on the circuit this code reports. The description of P03BD puts it on cylinder 5.

Check these first

• A failed cylinder 5 pressure sensor
• Damaged wiring or a connector at the cylinder 5 sensor
• An open or short in the sensor 5 circuit
• An ECM that cannot read the cylinder 5 signal
• Corrosion at the cylinder 5 sensor connector

What to do next

1. Check the cylinder 5 pressure signal on a scan tool
2. Inspect the sensor 5 connector and harness for damage
3. Test the sensor 5 circuit for an open or short
4. Measure the sensor 5 resistance against spec
5. Replace the cylinder 5 pressure sensor if the circuit tests good
6. Clear the code and retest

Look up another code