What are the common causes of P03DB?

Failed cylinder 8 pressure sensor. Open or shorted wire in the cylinder 8 sensor circuit. Corrosion or water at the cylinder 8 sensor connector. Incorrect cylinder 8 sensor installation or calibration. Low battery voltage affecting the cylinder 8 sensor.

Check battery voltage and the charging system. Inspect the cylinder 8 pressure sensor and connector. Test the cylinder 8 sensor circuit for opens and shorts. Read cylinder 8 pressure live data against spec. Replace the cylinder 8 pressure sensor if the circuit is sound. Clear the code and retest.

P03DB

Cylinder 8 Pressure Sensor Circuit

System: Ignition and misfire (P code)
Lamp: Check Engine Light
Category: Powertrain - Ignition

What it means

P03DB means Cylinder 8 Pressure Sensor Circuit.

Where it lives

For P03DB, the sensor sits on the circuit this code reports. The description of P03DB puts it on cylinder 8.

Check these first

Failed cylinder 8 pressure sensor
Open or shorted wire in the cylinder 8 sensor circuit
Corrosion or water at the cylinder 8 sensor connector
Incorrect cylinder 8 sensor installation or calibration
Low battery voltage affecting the cylinder 8 sensor

What to do next

Check battery voltage and the charging system
Inspect the cylinder 8 pressure sensor and connector
Test the cylinder 8 sensor circuit for opens and shorts
Read cylinder 8 pressure live data against spec
Replace the cylinder 8 pressure sensor if the circuit is sound
Clear the code and retest

Look up another code

Code or symptom

Enter a full code or a symptom. Press / to search. How to read a code

Type a code above, or start from a symptom or a common code.

Updated

Generic SAE J2012 definition. Last updated 2026-10-10.