OBD Active Grille Air Shutter B Position Sensor Circuit Intermittent
What it means
P05AD stands for Active Grille Air Shutter B Position Sensor Circuit Intermittent. P05AD is a P code, so the fault sits in the engine, transmission and emissions systems. For P05AD, the second digit places it in speed and idle control. For P05AD, work through the cause list below, cheapest checks first.
Where it lives
For P05AD, the circuit described runs through the sensor. The description of P05AD reports a fault at the sensor.
What to check first
For P05AD, check the wiring and connector on this circuit first, since a broken terminal gives the same reading as a failed part.
Check these first
- P05AD: Faulty sensor or actuator in the control circuit
- P05AD: Wiring, connector, or fuse problem for the affected output
- P05AD: Low or unstable system voltage from the battery or charging system
- P05AD: Failed PCM/ECM or a software error
- P05AD: Poor ground connection for the control module
What to do next
P05AD is a fault in the speed and idle control system. The steps below are general, so what actually failed on your vehicle may not be what P05AD names.
- P05AD: Verify battery voltage and charging system health first
- P05AD: Read all related module codes with an OBD-II scanner
- P05AD: Inspect wiring, connectors, and grounds for the affected circuit
- P05AD: Test the sensor or actuator with live data and actuation commands
- P05AD: Check for PCM software updates or TSBs before replacing modules
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.