What are the common causes of P0760?

A failed shift solenoid C. An open or short in the shift solenoid C wiring. Corrosion at the shift solenoid C connector. Dirty transmission fluid. A TCM driver fault.

Read shift solenoid C data on a scan tool. Test the shift solenoid C circuit for short or open. Measure the shift solenoid C resistance. Check the fluid level and condition. Replace the shift solenoid C if the coil is off spec. Clear the code and retest.

P0760

Shift Solenoid C

System: Transmission (P code)
Lamp: Check Engine Light
Category: Powertrain - Transmission

What it means

P0760 means Shift Solenoid C.

Where it lives

For P0760, the description names the solenoid as the part involved.

Check these first

A failed shift solenoid C
An open or short in the shift solenoid C wiring
Corrosion at the shift solenoid C connector
Dirty transmission fluid
A TCM driver fault

What to do next

Read shift solenoid C data on a scan tool
Test the shift solenoid C circuit for short or open
Measure the shift solenoid C resistance
Check the fluid level and condition
Replace the shift solenoid C if the coil is off spec
Clear the code and retest

Look up another code

Code or symptom

Enter a full code or a symptom. Press / to search. How to read a code

Type a code above, or start from a symptom or a common code.

Updated

Generic SAE J2012 definition. Last updated 2026-10-10.