Upshift/Skip Shift Solenoid Control Circuit Low

Where it lives

For P080C, the solenoid sits on the circuit this code reports. The description of P080C reports a fault at the solenoid.

Check these first

• A short to ground in the upshift/skip shift solenoid control circuit
• A failed upshift/skip shift solenoid
• Corrosion at the solenoid connector
• A faulty TCM
• Low battery voltage

What to do next

1. Read the upshift/skip shift solenoid voltage on a scan tool
2. Test the solenoid control circuit for a short to ground
3. Measure the solenoid resistance
4. Check the battery voltage and ground
5. Replace the solenoid if the circuit tests good
6. Clear the code and retest

Look up another code