Transmission Fluid Pressure Sensor/Switch H Circuit High

Where it lives

For P084D, the circuit described runs through the sensor. The description of P084D reports a fault at the sensor.

Check these first

• An open in the sensor H return wire
• A sensor H reading above the expected range
• A stuck line pressure regulator valve
• A signal wire shorted to voltage

What to do next

1. Watch sensor H pressure on a scan tool
2. Test the return wire for an open
3. Test the signal wire for a short to voltage
4. Check the line pressure regulator valve
5. Replace sensor H if the value stays high
6. Clear the code and retest

Look up another code