Gear Lever X Position Sensor 2 Circuit

Where it lives

For P089A, the circuit described runs through the sensor. The description of P089A reports a fault at the sensor.

Check these first

• A failed gear lever X position sensor 2
• An open or short in the sensor 2 wiring
• Corrosion at the sensor 2 connector
• A poor sensor 2 ground

What to do next

1. Read gear lever X position sensor 2 on a scan tool
2. Move the lever and watch the sensor 2 value
3. Test the sensor 2 wiring for an open or short
4. Check the sensor 2 ground
5. Replace the sensor if it does not respond
6. Clear the code and retest

Look up another code