Gear Lever Y Position Sensor 2 Circuit High

Where it lives

For P08A2, the sensor sits on the circuit this code reports. The description of P08A2 reports a fault at the sensor.

Check these first

• An open in the gear lever Y position sensor 2 ground
• A signal wire shorted to voltage
• A disconnected sensor 2 ground terminal
• A failed gear lever Y position sensor 2

What to do next

1. Read gear lever Y position sensor 2 voltage on a scan tool
2. Test the sensor 2 ground for an open
3. Test the signal wire for a short to voltage
4. Check the connector pins at the sensor
5. Replace the sensor if the ground and wiring test good
6. Clear the code and retest

Look up another code