Hydraulic Pressure Sensor Circuit Low

Where it lives

For P0934, the circuit described runs through the sensor. The description of P0934 reports a fault at the sensor.

Check these first

• A short to ground in the hydraulic pressure sensor circuit
• A pressure sensor signal wire grounded
• Corrosion at the pressure sensor connector
• A failed hydraulic pressure sensor

What to do next

1. Read hydraulic pressure sensor voltage on a scan tool
2. Test the pressure sensor signal wire for a short to ground
3. Check the pressure sensor connector for corrosion
4. Measure the sensor reference voltage
5. Replace the sensor if the signal stays low
6. Clear the code and retest

Look up another code