Generator Position Sensor Circuit B Low

Where it lives

For P0C6B, the sensor sits on the circuit this code reports. The description of P0C6B reports a fault at the sensor.

Check these first

• A short to ground in the generator position sensor B circuit
• A weak generator position sensor B output
• Corrosion at the sensor B connector
• A low reference voltage feeding sensor B
• Worn brushes or a bearing disturbing the sensor B signal

What to do next

1. Read generator position sensor B voltage on a scan tool
2. Inspect the sensor B connector and wiring
3. Test the sensor B circuit for a short to ground
4. Measure the sensor B output against the reference
5. Replace the sensor if the output stays low
6. Clear the code and retest

Look up another code