Charge Port Door A Position Sensor Circuit High

Where it lives

For P0CCF, the circuit described runs through the sensor. The description of P0CCF reports a fault at the sensor.

Check these first

• A short to voltage on the charge port door A position sensor wire
• An open in the sensor ground
• A failed charge port door A position sensor
• A disconnected sensor connector
• A sticking door holding the sensor high

What to do next

1. Read charge port door A position on a scan tool
2. Inspect the sensor connector and wiring
3. Test the sensor circuit for a short to voltage
4. Measure the sensor ground resistance
5. Replace the sensor if the reading stays high
6. Clear the code and retest

Look up another code