What are the common causes of P0DB8?

An open or high resistance path in cell balancing circuit D. A balancing resistor that has failed on circuit D. A cell controller fault that skips circuit D. A chafed cell harness wire at circuit D.

Read cell voltages and compare the circuit D group. Command balancing and watch circuit D for any change. Check continuity of the circuit D balancing path. Inspect the cell harness at circuit D for chafing. Service the balancing board if circuit D stays inactive. Clear the code and retest.

P0DB8

Hybrid/EV Battery Cell Balancing Circuit D

System: Powertrain control (P code)
Lamp: Check Engine Light
Category: Powertrain - Hybrid Propulsion

What it means

P0DB8 means Hybrid/EV Battery Cell Balancing Circuit D.

Check these first

An open or high resistance path in cell balancing circuit D
A balancing resistor that has failed on circuit D
A cell controller fault that skips circuit D
A chafed cell harness wire at circuit D

What to do next

Read cell voltages and compare the circuit D group
Command balancing and watch circuit D for any change
Check continuity of the circuit D balancing path
Inspect the cell harness at circuit D for chafing
Service the balancing board if circuit D stays inactive
Clear the code and retest

Look up another code

Code or symptom

Enter a full code or a symptom. Press / to search. How to read a code

Type a code above, or start from a symptom or a common code.

Updated

Generic SAE J2012 definition. Last updated 2026-10-10.