Generator Inverter Temperature Sensor C Circuit

Where it lives

For P0DF2, the circuit described runs through the sensor. The description of P0DF2 reports a fault at the sensor.

Check these first

• An open or shorted generator inverter temperature sensor C circuit
• A failed sensor C inside the generator inverter
• Corroded pins in the sensor C connector
• A broken wire between sensor C and the inverter control board

What to do next

1. Inspect the sensor C wiring for opens and shorts
2. Check the sensor C connector for corrosion
3. Measure the sensor C signal with the system powered
4. Compare the reading to ambient
5. Service the generator inverter if the sensor C circuit does not recover
6. Clear the code and retest

Look up another code