What are the common causes of P2011?

An open in the bank 2 runner control circuit. A failed bank 2 runner control valve. A backed out pin at the bank 2 runner connector. Chafed wiring along the bank 2 runner harness.

Command intake manifold runner control on bank 2 with a scan tool. Test the bank 2 runner circuit for an open. Check the bank 2 runner connector pins. Measure the bank 2 runner control resistance. Replace the bank 2 runner control valve if the circuit tests good. Clear the code and retest.

P2011

Intake Manifold Runner Control Circuit/Open Bank 2

System: Fuel and air metering (P code)
Lamp: Check Engine Light
Category: Powertrain - Fuel/Air Metering

What it means

P2011 means Intake Manifold Runner Control Circuit/Open Bank 2.

Check these first

An open in the bank 2 runner control circuit
A failed bank 2 runner control valve
A backed out pin at the bank 2 runner connector
Chafed wiring along the bank 2 runner harness

What to do next

Command intake manifold runner control on bank 2 with a scan tool
Test the bank 2 runner circuit for an open
Check the bank 2 runner connector pins
Measure the bank 2 runner control resistance
Replace the bank 2 runner control valve if the circuit tests good
Clear the code and retest

Look up another code

Code or symptom

Enter a full code or a symptom. Press / to search. How to read a code

Type a code above, or start from a symptom or a common code.

Updated

Generic SAE J2012 definition. Last updated 2026-10-10.