Exhaust Gas Temperature Sensor Circuit Low Bank 2 Sensor 2

Where it lives

For P2035, the circuit described runs through the sensor. The description of P2035 puts it on bank 2.

Check these first

• A short to ground on the bank 2 sensor 2 exhaust gas temperature signal wire
• A sensor ground that is corroded or open
• A failed bank 2 sensor 2 exhaust gas temperature sensor
• Water intrusion at the sensor connector

What to do next

1. Read bank 2 sensor 2 exhaust gas temperature on a scan tool
2. Test the sensor signal wire for a short to ground
3. Check the sensor ground for corrosion
4. Inspect the sensor connector for water
5. Replace the bank 2 sensor 2 exhaust gas temperature sensor if the circuit tests good
6. Clear the code and retest

Look up another code