What are the common causes of P219E?

A dirty or faulty fuel injector on cylinder 3. A weak spark plug or ignition coil on cylinder 3. An intake manifold leak near cylinder 3. Low fuel pressure affecting cylinder 3. Low compression on cylinder 3.

Read the cylinder 3 fuel trim on a scan tool. Swap the cylinder 3 injector and see if the fault follows. Check the cylinder 3 spark plug and ignition coil. Check for an intake leak near cylinder 3. Run a compression test on cylinder 3. Clear the code and retest.

P219E

Cylinder 3 Air-Fuel Ratio Imbalance

System: Fuel and air metering (P code)
Lamp: Check Engine Light
Category: Powertrain - Fuel/Air Metering

What it means

P219E means Cylinder 3 Air-Fuel Ratio Imbalance.

Check these first

A dirty or faulty fuel injector on cylinder 3
A weak spark plug or ignition coil on cylinder 3
An intake manifold leak near cylinder 3
Low fuel pressure affecting cylinder 3
Low compression on cylinder 3

What to do next

Read the cylinder 3 fuel trim on a scan tool
Swap the cylinder 3 injector and see if the fault follows
Check the cylinder 3 spark plug and ignition coil
Check for an intake leak near cylinder 3
Run a compression test on cylinder 3
Clear the code and retest

Look up another code

Code or symptom

Enter a full code or a symptom. Press / to search. How to read a code

Type a code above, or start from a symptom or a common code.

Updated

Generic SAE J2012 definition. Last updated 2026-10-10.