Injector Control Pressure Sensor Circuit Low

Where it lives

For P2285, the sensor sits on the circuit this code reports. The description of P2285 reports a fault at the sensor.

Check these first

• An injector control pressure sensor signal wire shorted to ground
• A failed injector control pressure sensor
• An open ICP sensor ground circuit
• Low fuel pressure

What to do next

1. Read injector control pressure on a scan tool
2. Test the ICP sensor signal wire for a short to ground
3. Check the ICP sensor ground circuit
4. Verify fuel pressure with a gauge
5. Replace the injector control pressure sensor if the circuit tests good
6. Clear the code and retest

Look up another code