OBD Cylinder 3 Alternative Fuel Injector Control Circuit Range/Performance
What it means
P22E4 stands for Cylinder 3 Alternative Fuel Injector Control Circuit Range/Performance. P22E4 is a P code, so the fault sits in the engine, transmission and emissions systems. For P22E4, the second digit places it in injector circuits. For P22E4, work through the cause list below, cheapest checks first.
Where it lives
For P22E4, the description names the injector as the part involved. The description of P22E4 puts it on cylinder 3.
What to check first
For P22E4, clear the code, drive a short distance and read it again, since a code that comes back is still there and one that does not was history.
Check these first
- P22E4: Faulty or contaminated sensor in the fuel/air metering circuit
- P22E4: Damaged or shorted wiring or connector for the affected circuit
- P22E4: Vacuum leak or intake system restriction
- P22E4: Failing fuel pump, injector, or fuel pressure regulator
What to do next
P22E4 is a fault in the injector circuits system. The steps below are general, so what actually failed on your vehicle may not be what P22E4 names.
- P22E4: Read freeze frame data and related codes with an OBD-II scanner
- P22E4: Inspect the affected sensor wiring and connector for damage
- P22E4: Compare live sensor readings (fuel trim, airflow, temperatures) to manufacturer specs
- P22E4: Smoke test the intake system if lean or vacuum conditions are suspected
- P22E4: Replace the failed component after confirming it with live data
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.