What are the common causes of P2334?

A short to voltage on the coil L primary control wire. A failed ignition coil L holding the driver signal high. A chafed coil L primary control wire shorting to a nearby circuit. A fault in the ECM coil L driver.

Read the coil L primary control circuit voltage on a scan tool. Inspect the coil L primary control harness for chafing. Test the coil L primary control wire for a short to voltage. Disconnect coil L and watch the circuit voltage. Replace ignition coil L if the wiring tests good. Clear the code and retest.

P2334

Ignition Coil L Primary Control Circuit High

System: Ignition and misfire (P code)
Lamp: Check Engine Light
Category: Powertrain - Ignition

What it means

P2334 means Ignition Coil L Primary Control Circuit High.

Check these first

A short to voltage on the coil L primary control wire
A failed ignition coil L holding the driver signal high
A chafed coil L primary control wire shorting to a nearby circuit
A fault in the ECM coil L driver

What to do next

Read the coil L primary control circuit voltage on a scan tool
Inspect the coil L primary control harness for chafing
Test the coil L primary control wire for a short to voltage
Disconnect coil L and watch the circuit voltage
Replace ignition coil L if the wiring tests good
Clear the code and retest

Look up another code

Code or symptom

Enter a full code or a symptom. Press / to search. How to read a code

Type a code above, or start from a symptom or a common code.

Updated

Generic SAE J2012 definition. Last updated 2026-10-10.