OBD NH3 Sensor Heater Circuit/Open
What it means
P24E6 stands for NH3 Sensor Heater Circuit/Open. P24E6 is a P code, so the fault sits in the engine, transmission and emissions systems. For P24E6, the second digit places it in auxiliary emission controls. For P24E6, work through the cause list below, cheapest checks first.
Where it lives
For P24E6, the sensor sits on the circuit this code reports. The description of P24E6 reports the sensor as open.
What to check first
For P24E6, pull the connector and inspect the terminals for spread, corrosion or backed-out pins before testing anything else.
Check these first
- P24E6: Carbon buildup or blockage in the EGR, EVAP, or air injection system
- P24E6: Failed solenoid, valve, or pump in the auxiliary emissions circuit
- P24E6: Wiring, connector, or fuse fault for the emission component
- P24E6: Small leaks in vacuum or EVAP lines
- P24E6: Failing catalytic converter or oxygen sensor reporting incorrectly
What to do next
P24E6 reports from the auxiliary emission controls system. These steps cover P24E6 in general, and the exact cause on your vehicle can differ from the cause named above.
- P24E6: Read related codes and freeze frame with an OBD-II scanner
- P24E6: Inspect hoses, valves, and solenoids for leaks, cracks, or carbon buildup
- P24E6: Smoke test the EVAP or intake system if a leak is suspected
- P24E6: Command components on/off with a scan tool and watch them respond
- P24E6: Clean or replace the blocked or failed component
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.