OBD Fuel Level Sensor C Circuit Intermittent
What it means
P25DB stands for Fuel Level Sensor C Circuit Intermittent. P25DB is a P code, so the fault sits in the engine, transmission and emissions systems. For P25DB, the second digit places it in speed and idle control. For P25DB, work through the cause list below, cheapest checks first.
Where it lives
For P25DB, the sensor sits on the circuit this code reports. The description of P25DB reports a fault at the sensor.
What to check first
For P25DB, pull the connector and inspect the terminals for spread, corrosion or backed-out pins before testing anything else.
Check these first
- P25DB: Faulty sensor or actuator in the control circuit
- P25DB: Wiring, connector, or fuse problem for the affected output
- P25DB: Low or unstable system voltage from the battery or charging system
- P25DB: Failed PCM/ECM or a software error
- P25DB: Poor ground connection for the control module
What to do next
P25DB belongs to the speed and idle control system. These are the general steps for P25DB, and the exact cause on your vehicle can differ.
- P25DB: Verify battery voltage and charging system health first
- P25DB: Read all related module codes with an OBD-II scanner
- P25DB: Inspect wiring, connectors, and grounds for the affected circuit
- P25DB: Test the sensor or actuator with live data and actuation commands
- P25DB: Check for PCM software updates or TSBs before replacing modules
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.