OBD
P25F6
AIR System B
What it means
P25F6 stands for AIR System B. P25F6 is a P code, so the fault sits in the engine, transmission and emissions systems. For P25F6, the second digit places it in speed and idle control. For P25F6, work through the cause list below, cheapest checks first.
What to check first
For P25F6, clear the code, drive a short distance and read it again, since a code that comes back is still there and one that does not was history.
Check these first
- P25F6: Faulty sensor or actuator in the control circuit
- P25F6: Wiring, connector, or fuse problem for the affected output
- P25F6: Low or unstable system voltage from the battery or charging system
- P25F6: Failed PCM/ECM or a software error
- P25F6: Poor ground connection for the control module
What to do next
P25F6 is a fault in the speed and idle control system. The steps below are general, so what actually failed on your vehicle may not be what P25F6 names.
- P25F6: Verify battery voltage and charging system health first
- P25F6: Read all related module codes with an OBD-II scanner
- P25F6: Inspect wiring, connectors, and grounds for the affected circuit
- P25F6: Test the sensor or actuator with live data and actuation commands
- P25F6: Check for PCM software updates or TSBs before replacing modules
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.