What are the common causes of P2615?

Camshaft A signal wire shorted to ground on bank 1. Failed camshaft A sensor on bank 1. Corroded camshaft A connector. Open in the signal return. ECM driver fault on the bank 1 camshaft A input.

Read camshaft A position live data on bank 1. Test the camshaft A signal wire for a short to ground. Inspect the bank 1 camshaft A connector. Check the sensor supply and ground. Swap the bank 1 camshaft A sensor with a known good one. Clear the code and retest.

P2615

Camshaft A Position Signal Output Circuit Low Bank 1

System: Computer output circuits (P code)
Lamp: Check Engine Light
Category: Powertrain - Computer and Auxiliary Controls

What it means

P2615 means Camshaft A Position Signal Output Circuit Low Bank 1.

Check these first

Camshaft A signal wire shorted to ground on bank 1
Failed camshaft A sensor on bank 1
Corroded camshaft A connector
Open in the signal return
ECM driver fault on the bank 1 camshaft A input

What to do next

Read camshaft A position live data on bank 1
Test the camshaft A signal wire for a short to ground
Inspect the bank 1 camshaft A connector
Check the sensor supply and ground
Swap the bank 1 camshaft A sensor with a known good one
Clear the code and retest

Look up another code

Code or symptom

Enter a full code or a symptom. Press / to search. How to read a code

Type a code above, or start from a symptom or a common code.

Updated

Generic SAE J2012 definition. Last updated 2026-10-10.