OBD Glow Plug Control Module 2 Over Temperature
What it means
P263F stands for Glow Plug Control Module 2 Over Temperature. P263F is a P code, so the fault sits in the engine, transmission and emissions systems. For P263F, the second digit places it in computer output circuits. For P263F, work through the cause list below, cheapest checks first.
Where it lives
For P263F, start at the module the description names.
What to check first
For P263F, clear the code, drive a short distance and read it again, since a code that comes back is still there and one that does not was history.
Check these first
- P263F: Faulty sensor or actuator in the control circuit
- P263F: Wiring, connector, or fuse problem for the affected output
- P263F: Low or unstable system voltage from the battery or charging system
- P263F: Failed PCM/ECM or a software error
- P263F: Poor ground connection for the control module
What to do next
P263F reports from the computer output circuits system. These steps cover P263F in general, and the exact cause on your vehicle can differ from the cause named above.
- P263F: Verify battery voltage and charging system health first
- P263F: Read all related module codes with an OBD-II scanner
- P263F: Inspect wiring, connectors, and grounds for the affected circuit
- P263F: Test the sensor or actuator with live data and actuation commands
- P263F: Check for PCM software updates or TSBs before replacing modules
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.