OBD Engine Coolant Bypass Valve C Range/Performance
What it means
P26BB stands for Engine Coolant Bypass Valve C Range/Performance. P26BB is a P code, so the fault sits in the engine, transmission and emissions systems. For P26BB, the second digit places it in computer output circuits. For P26BB, work through the cause list below, cheapest checks first.
Where it lives
For P26BB, the part to look at first is the valve named here.
What to check first
For P26BB, read the stored codes from every module, not just the engine, because related codes often name the same fault more precisely.
Check these first
- P26BB: Faulty sensor or actuator in the control circuit
- P26BB: Wiring, connector, or fuse problem for the affected output
- P26BB: Low or unstable system voltage from the battery or charging system
- P26BB: Failed PCM/ECM or a software error
- P26BB: Poor ground connection for the control module
What to do next
P26BB is a fault in the computer output circuits system. The steps below are general, so what actually failed on your vehicle may not be what P26BB names.
- P26BB: Verify battery voltage and charging system health first
- P26BB: Read all related module codes with an OBD-II scanner
- P26BB: Inspect wiring, connectors, and grounds for the affected circuit
- P26BB: Test the sensor or actuator with live data and actuation commands
- P26BB: Check for PCM software updates or TSBs before replacing modules
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.