OBD
P26E3
Fuel Mode Indicator Lamp Control Circuit High
What it means
P26E3 stands for Fuel Mode Indicator Lamp Control Circuit High. P26E3 is a P code, so the fault sits in the engine, transmission and emissions systems. For P26E3, the second digit places it in computer output circuits. For P26E3, work through the cause list below, cheapest checks first.
What to check first
For P26E3, check the wiring and connector on this circuit first, since a broken terminal gives the same reading as a failed part.
Check these first
- P26E3: Faulty sensor or actuator in the control circuit
- P26E3: Wiring, connector, or fuse problem for the affected output
- P26E3: Low or unstable system voltage from the battery or charging system
- P26E3: Failed PCM/ECM or a software error
- P26E3: Poor ground connection for the control module
What to do next
P26E3 belongs to the computer output circuits system. These are the general steps for P26E3, and the exact cause on your vehicle can differ.
- P26E3: Verify battery voltage and charging system health first
- P26E3: Read all related module codes with an OBD-II scanner
- P26E3: Inspect wiring, connectors, and grounds for the affected circuit
- P26E3: Test the sensor or actuator with live data and actuation commands
- P26E3: Check for PCM software updates or TSBs before replacing modules
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.