Pressure Control Solenoid E Intermittent

Where it lives

For P2726, the part to look at first is the solenoid named here.

Check these first

• An intermittent open or short in the pressure control solenoid E wiring
• A worn or corroded pin at the pressure control solenoid E connector
• Debris blocking the solenoid E valve and sticking it
• A failing solenoid E coil that drops out when hot
• Dirty fluid clogging the solenoid E feed port

What to do next

1. Check transmission fluid level and condition
2. Inspect the pressure control solenoid E connector and pins
3. Test the solenoid E circuit for intermittent opens and shorts
4. Command solenoid E with a scan tool and watch pressure control data
5. Replace pressure control solenoid E if it drops out
6. Clear the code, road test, and retest

Look up another code