Torque Converter Clutch Pressure Control Solenoid Control Circuit/Open

Where it lives

For P2761, the circuit described runs through the solenoid. The description of P2761 reports the solenoid as open.

Check these first

• An open in the torque converter clutch pressure control solenoid control circuit
• A short to ground or voltage on the torque converter clutch pressure control solenoid control wire
• A failed torque converter clutch pressure control solenoid
• A corroded or backed out pin at the torque converter clutch pressure control solenoid connector

What to do next

1. Read torque converter clutch pressure control solenoid status on a scan tool
2. Command the torque converter clutch pressure control solenoid on and off
3. Test the torque converter clutch pressure control solenoid control circuit for open and short faults
4. Check the torque converter clutch pressure control solenoid connector pins
5. Replace the torque converter clutch pressure control solenoid if the circuit tests good
6. Clear the code and retest

Look up another code