Pressure Control Solenoid G Stuck On

Where it lives

For P2809, the part to look at first is the solenoid named here.

Check these first

• A pressure control solenoid G that stays on when commanded off
• Debris holding the pressure control solenoid G valve open
• A failed pressure control solenoid G
• A short to voltage on the pressure control solenoid G control wire

What to do next

1. Read pressure control solenoid G status on a scan tool
2. Command pressure control solenoid G off and watch the release pressure
3. Check transmission fluid level and condition
4. Test the pressure control solenoid G control wire for a short to voltage
5. Replace pressure control solenoid G if it stays on when commanded
6. Clear the code and retest

Look up another code