Pressure Control Solenoid G Control Circuit Low

Where it lives

For P2814, the solenoid sits on the circuit this code reports. The description of P2814 reports a fault at the solenoid.

Check these first

• A short to ground on the pressure control solenoid G control wire
• An open in the pressure control solenoid G return circuit
• A failed pressure control solenoid G
• Low charging system voltage

What to do next

1. Read pressure control solenoid G voltage on a scan tool
2. Test the pressure control solenoid G control wire for a short to ground
3. Test the pressure control solenoid G return circuit for an open
4. Check charging system voltage
5. Replace pressure control solenoid G if the circuit tests good
6. Clear the code and retest

Look up another code