Pressure Control Solenoid J Performance/Stuck Off

Where it lives

For P2820, the description names the solenoid as the part involved.

Check these first

• A pressure control solenoid J that stays off when commanded on
• A clogged pressure control solenoid J screen or passage
• A failed pressure control solenoid J
• Low or contaminated transmission fluid

What to do next

1. Read pressure control solenoid J status on a scan tool
2. Command pressure control solenoid J on and watch the apply pressure
3. Check transmission fluid level and condition
4. Remove and inspect pressure control solenoid J for a stuck valve
5. Replace pressure control solenoid J if it stays off when commanded
6. Clear the code and retest

Look up another code