Pressure Control Solenoid J Control Circuit Low

Where it lives

For P2826, the circuit described runs through the solenoid. The description of P2826 reports a fault at the solenoid.

Check these first

• A short to ground on the pressure control solenoid J control wire
• An open in the pressure control solenoid J return circuit
• A failed pressure control solenoid J
• Low charging system voltage

What to do next

1. Read pressure control solenoid J voltage on a scan tool
2. Test the pressure control solenoid J control wire for a short to ground
3. Test the pressure control solenoid J return circuit for an open
4. Check charging system voltage
5. Replace pressure control solenoid J if the circuit tests good
6. Clear the code and retest

Look up another code