Pressure Control Solenoid K Performance/Stuck Off

Where it lives

For P2829, the part to look at first is the solenoid named here.

Check these first

• A pressure control solenoid K that stays off when commanded on
• A clogged pressure control solenoid K screen or passage
• A failed pressure control solenoid K
• Low or contaminated transmission fluid

What to do next

1. Read pressure control solenoid K status on a scan tool
2. Command pressure control solenoid K on and watch the apply pressure
3. Check transmission fluid level and condition
4. Remove and inspect pressure control solenoid K for a stuck valve
5. Replace pressure control solenoid K if it stays off when commanded
6. Clear the code and retest

Look up another code