What are the common causes of P283E?

A short to voltage on the shift fork C position signal wire. High resistance in the shift fork C position sensor ground. A failed shift fork C position sensor. A failed shift fork C position input in the control module.

Read shift fork C position voltage on a scan tool. Test the shift fork C position signal wire for a short to voltage. Measure resistance through the shift fork C position sensor ground. Check the shift fork C position sensor connector pins. Replace the shift fork C position sensor if the circuit tests good. Clear the code and retest.

P283E

Shift Fork C Position Circuit High

System: Transmission (P code)
Lamp: Check Engine Light
Category: Powertrain - Transmission

What it means

P283E means Shift Fork C Position Circuit High.

Check these first

A short to voltage on the shift fork C position signal wire
High resistance in the shift fork C position sensor ground
A failed shift fork C position sensor
A failed shift fork C position input in the control module

What to do next

Read shift fork C position voltage on a scan tool
Test the shift fork C position signal wire for a short to voltage
Measure resistance through the shift fork C position sensor ground
Check the shift fork C position sensor connector pins
Replace the shift fork C position sensor if the circuit tests good
Clear the code and retest

Look up another code

Code or symptom

Enter a full code or a symptom. Press / to search. How to read a code

Type a code above, or start from a symptom or a common code.

Updated

Generic SAE J2012 definition. Last updated 2026-10-10.