What are the common causes of P2AD4?

A weak or failing high voltage battery pack. A DC to DC converter that is not holding the intermediate bus voltage. High resistance in the intermediate voltage bus cable or connector. A failing inverter or power module loading the intermediate bus.

Scan all modules and record the intermediate system voltage freeze frame. Inspect the intermediate voltage bus cables and connectors for heat or corrosion. Test the DC to DC converter output against the module-reported voltage. Load test the high voltage battery pack state of charge and health. Replace the DC to DC converter or battery module that cannot hold the bus voltage. Clear the code and retest.

P2AD4

Intermediate System Voltage Low

System: Powertrain control (P code)
Lamp: Check Engine Light
Category: Powertrain - Hybrid Propulsion

What it means

P2AD4 means Intermediate System Voltage Low.

Check these first

A weak or failing high voltage battery pack
A DC to DC converter that is not holding the intermediate bus voltage
High resistance in the intermediate voltage bus cable or connector
A failing inverter or power module loading the intermediate bus

What to do next

Scan all modules and record the intermediate system voltage freeze frame
Inspect the intermediate voltage bus cables and connectors for heat or corrosion
Test the DC to DC converter output against the module-reported voltage
Load test the high voltage battery pack state of charge and health
Replace the DC to DC converter or battery module that cannot hold the bus voltage
Clear the code and retest

Look up another code

Code or symptom

Enter a full code or a symptom. Press / to search. How to read a code

Type a code above, or start from a symptom or a common code.

Updated

Generic SAE J2012 definition. Last updated 2026-10-10.