Battery Charging System Positive Contactor B Circuit

Check these first

• A failed positive contactor B in the battery charging system
• An open or short in the positive contactor B control wiring
• A corroded positive contactor B connector
• A control module driver fault on the positive contactor B output

What to do next

1. Scan all modules and read the positive contactor B command and state
2. Inspect the positive contactor B connector and wiring for damage
3. Test the positive contactor B control circuit for open and short faults
4. Measure the positive contactor B coil resistance
5. Replace positive contactor B if the circuit tests good and it will not switch
6. Clear the code and retest

Look up another code