A Camshaft Position Actuator Temperature Sensor Circuit High Bank 1

Where it lives

For P34A7, the sensor sits on the circuit this code reports. The description of P34A7 puts it on bank 1.

Check these first

• A short to voltage on the bank 1 A actuator temperature sensor signal circuit
• An open in the bank 1 A sensor ground
• A bank 1 A sensor reading above the true actuator temperature
• A failed sensing element inside the bank 1 A sensor

What to do next

1. Read the bank 1 actuator temperature sensor value on a scan tool
2. Test the bank 1 A sensor signal circuit for a short to voltage
3. Check the bank 1 A sensor ground for an open
4. Compare the bank 1 reading to a known good sensor
5. Replace the bank 1 A actuator temperature sensor if the circuit tests good
6. Clear the code and retest

Look up another code