OBD A Camshaft Position Actuator Position Sensor A Circuit Low Bank 2
What it means
P34B2 stands for A Camshaft Position Actuator Position Sensor A Circuit Low Bank 2. P34B2 is a P code, so the fault sits in the engine, transmission and emissions systems. For P34B2, the second digit places it in auxiliary emission controls. For P34B2, work through the cause list below, cheapest checks first.
Where it lives
For P34B2, the sensor sits on the circuit this code reports. The description of P34B2 puts it on bank 2.
What to check first
For P34B2, compare the reading on bank 2 against the other bank on the same scan tool, because a bank that reads differently from its twin is the fault.
Check these first
- P34B2: Carbon buildup or blockage in the EGR, EVAP, or air injection system
- P34B2: Failed solenoid, valve, or pump in the auxiliary emissions circuit
- P34B2: Wiring, connector, or fuse fault for the emission component
- P34B2: Small leaks in vacuum or EVAP lines
- P34B2: Failing catalytic converter or oxygen sensor reporting incorrectly
What to do next
P34B2 is a fault in the auxiliary emission controls system. The steps below are general, so what actually failed on your vehicle may not be what P34B2 names.
- P34B2: Read related codes and freeze frame with an OBD-II scanner
- P34B2: Inspect hoses, valves, and solenoids for leaks, cracks, or carbon buildup
- P34B2: Smoke test the EVAP or intake system if a leak is suspected
- P34B2: Command components on/off with a scan tool and watch them respond
- P34B2: Clean or replace the blocked or failed component
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.