OBD B Camshaft Position Actuator Position Sensor A Range/Performance Bank 2
What it means
P34C1 stands for B Camshaft Position Actuator Position Sensor A Range/Performance Bank 2. P34C1 is a P code, so the fault sits in the engine, transmission and emissions systems. For P34C1, the second digit places it in auxiliary emission controls. For P34C1, work through the cause list below, cheapest checks first.
Where it lives
For P34C1, the description names the sensor as the part involved. The description of P34C1 puts it on bank 2.
What to check first
For P34C1, compare the reading on bank 2 against the other bank on the same scan tool, because a bank that reads differently from its twin is the fault.
Check these first
- P34C1: Carbon buildup or blockage in the EGR, EVAP, or air injection system
- P34C1: Failed solenoid, valve, or pump in the auxiliary emissions circuit
- P34C1: Wiring, connector, or fuse fault for the emission component
- P34C1: Small leaks in vacuum or EVAP lines
- P34C1: Failing catalytic converter or oxygen sensor reporting incorrectly
What to do next
P34C1 reports from the auxiliary emission controls system. These steps cover P34C1 in general, and the exact cause on your vehicle can differ from the cause named above.
- P34C1: Read related codes and freeze frame with an OBD-II scanner
- P34C1: Inspect hoses, valves, and solenoids for leaks, cracks, or carbon buildup
- P34C1: Smoke test the EVAP or intake system if a leak is suspected
- P34C1: Command components on/off with a scan tool and watch them respond
- P34C1: Clean or replace the blocked or failed component
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.