OBD Camshaft Position Control Module Performance
What it means
P34C8 stands for Camshaft Position Control Module Performance. P34C8 is a P code, so the fault sits in the engine, transmission and emissions systems. For P34C8, the second digit places it in auxiliary emission controls. For P34C8, work through the cause list below, cheapest checks first.
Where it lives
For P34C8, start at the module the description names.
What to check first
For P34C8, read the stored codes from every module, not just the engine, because related codes often name the same fault more precisely.
Check these first
- P34C8: Carbon buildup or blockage in the EGR, EVAP, or air injection system
- P34C8: Failed solenoid, valve, or pump in the auxiliary emissions circuit
- P34C8: Wiring, connector, or fuse fault for the emission component
- P34C8: Small leaks in vacuum or EVAP lines
- P34C8: Failing catalytic converter or oxygen sensor reporting incorrectly
What to do next
P34C8 belongs to the auxiliary emission controls system. These are the general steps for P34C8, and the exact cause on your vehicle can differ.
- P34C8: Read related codes and freeze frame with an OBD-II scanner
- P34C8: Inspect hoses, valves, and solenoids for leaks, cracks, or carbon buildup
- P34C8: Smoke test the EVAP or intake system if a leak is suspected
- P34C8: Command components on/off with a scan tool and watch them respond
- P34C8: Clean or replace the blocked or failed component
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.