Vehicle Communication Bus F + Open

Check these first

• An open in the bus F (+) wire between two modules
• A broken or backed out pin at a bus F (+) connector
• A module connector not fully seated on the bus F (+) circuit
• Corrosion eating through the bus F (+) conductor

What to do next

1. Read stored codes on every module that shares bus F
2. Trace the bus F (+) wire end to end for an open
3. Check each bus F (+) connector pin for a poor fit or backing out
4. Repair or replace the open section of the bus F (+) wire
5. Replace the module that stays off the bus F (+) line
6. Clear the code and retest

Look up another code