Lost Communication With Image Processing Module B

Where it lives

For U023B, the part to look at first is the module named here.

Check these first

• A failed image processing module B
• Corrosion or damage at the module B connector
• A short or open in the module B harness
• A software or protocol fault in module B
• A failed camera or sensor in the system

What to do next

1. Inspect the module B connector for corrosion or damage
2. Test the module B harness for shorts and opens
3. Check power and ground at module B
4. Test the camera or sensor tied to module B
5. Update the module B software if a fault is stored
6. Clear the code and retest

Look up another code