Invalid Data Received From Folding Top Control Module

Where it lives

For U0507, the description names the module as the part involved.

Check these first

• Electrical noise on the data bus corrupting the folding top control module signal
• A low battery or charging fault that browns out the folding top control module
• A fault inside the folding top control module itself
• A loose, corroded, or water damaged connector at the folding top control module
• An open or short in the folding top control module wiring to the module that receives its data

What to do next

1. Scan all modules and record the stored and pending network codes
2. Check the folding top control module data bus wiring for opens, shorts, and chafing
3. Confirm the folding top control module reports correct live data on the scan tool
4. Check battery voltage and charging output
5. Repair or replace the folding top control module if the circuit, power, and bus tests pass
6. Clear the code and retest to confirm the folding top control module fault is gone

Look up another code