Invalid Data Received From Lateral Acceleration Sensor Module

Where it lives

For U0536, start at the sensor the description names.

Check these first

• A fault inside the lateral acceleration sensor module itself
• A loose, corroded, or water damaged connector at the lateral acceleration sensor module
• An open or short in the lateral acceleration sensor module wiring to the module that receives its data
• A lost power or ground feed to the lateral acceleration sensor module
• Stale calibration or an outdated software load in the lateral acceleration sensor module

What to do next

1. Scan all modules and record the stored and pending network codes
2. Inspect the lateral acceleration sensor module connector pins for corrosion, water, and looseness
3. Test the lateral acceleration sensor module power and ground feeds under load
4. Check the lateral acceleration sensor module data bus wiring for opens, shorts, and chafing
5. Repair or replace the lateral acceleration sensor module if the circuit, power, and bus tests pass
6. Clear the code and retest to confirm the lateral acceleration sensor module fault is gone

Look up another code