Invalid Data Received From Night Vision Control Module

Where it lives

For U05BE, the part to look at first is the module named here.

Check these first

• A data bus fault on the night vision control module network
• A failed night vision control module
• Loss of power or ground at the night vision control module
• Corrosion or water in the night vision control module connector

What to do next

1. Read night vision control module data on a scan tool
2. Inspect the night vision control module connector and harness
3. Check power and ground at the night vision control module
4. Test the data bus between the night vision control module and the network
5. Replace the night vision control module if the circuit tests pass
6. Clear the code and retest

Look up another code