Cold Start Injector 1

Where it lives

For P0213, the part to look at first is the injector named here.

Check these first

• A faulty cold start injector 1
• An open or short in the cold start injector 1 wiring
• A corroded cold start injector 1 connector
• Low fuel pressure at cold start
• A faulty ECM driver for the cold start injector

What to do next

1. Read the cold start injector 1 circuit on a scan tool
2. Inspect the injector 1 connector and wiring
3. Measure the injector 1 resistance against spec
4. Check the fuel pressure during a cold start
5. Replace cold start injector 1 if the coil is out of range
6. Clear the code and retest

Look up another code